B-960 Downmixing Transmitter (B-960-4K-TX-A)

  1. Power indicator — On: Powered on | Blinking: Starting up | Off: Powered off.

  2. System status light — On: Connected to network and detecting a source | Off: Does not detect a network connection| Blinking: Detects a network connection but not a source.

  3. DTS LED — Blue = DTS Surround; Red = DTS HD; Purple =DTS HD Master Audio.

  4. Dolby LED — Blue = Dolby Digital; Red = Dolby Digital Plus and Atmos; Purple = Dolby True HD Atmos; None = Dolby MAT (PCM) Atmos.

    Note: Dolby MAT (PCM) Atmos is not downmixed.

  5. USB Host — Input for PCs.

  6. USB Reserved — For future use.

  7. USB HID — Output for Human Interface Devices (HID), such as a mouse or keyboard.

  8. Reset — Press and hold for 10 seconds to restore to factory settings.

  9. 12V 2A power connection — Optional 12VDC 3A locking connection for external power supply (not included).

  10. IR Receiver — 3.5 mm mini mono/stereo for external receivers.

  11. IR Flasher — 3.5 mm mini mono output to IR emitter.

  12. HDMI In/Out — HDMI source input and output.

  13. 10GbE Network port— Provides access to the network and Power-over-Ethernet (PoE). B-960 configurations must use an Araknis 920 switch. Read MoIP configuration for AN-920 Edge switches for more information.

  14. SPDIF Out — SPDIF output.

  15. RS-232 — RJ45, RS-232, (TX, RX, Ground), EIA-561 pinout

  16. Network — Provides network access to a connected device.

  17. 3.5 mm Input— Analog audio embedding with the option to replace HDMI audio.

  18. L/R Audio Out — RCA analog audio de-embedding of 2-channel PCM audio.